A winter cover that is too small slips into the pool; one that is far too big flaps in the wind and collects water. The good news: measuring takes about five minutes with a tape measure and a helper.
The 4 ft rule
Winter covers are sold by pool size, and the tarp itself is 4 ft larger (2 ft extra on every side). That overlap is what the cable and winch, water bags or weights hold onto. So you measure the pool, not the cover: a 24 ft round pool takes a 24 ft cover with a 28' x 28' tarp.
Round above ground pools
- Measure across the pool from the inside of one wall to the inside of the opposite wall, through the center.
- Do not include the top rail or ledge.
- Round to the nearest common size: 15, 18, 21, 24 or 28 ft.
Popular sizes: 15 ft, 18 ft, 21 ft, 24 ft.
Oval above ground pools
- Measure the longest length inside the walls.
- Measure the widest width inside the walls.
- Match both numbers, for example 15 x 30 ft.
Popular sizes: 12x24, 15x30, 16x25.
Rectangular inground pools
- Measure the inside length and width at the coping (the edge you stand on).
- Note any steps or benches outside the rectangle. A standard winter tarp drapes over them; a fitted safety cover needs the exact step position.
Most common: 16 x 32 ft. All sizes: rectangle inground covers.
Between sizes?
Go up to the next size; a little extra overlap is fine. If your pool is an unusual shape or size, we make custom round, oval and rectangle covers.
Which thickness?
100 GSM is the budget choice for mild winters, 140 GSM suits most climates, and 180 GSM is the heaviest grade for snow, ice and wind.
Browse every size in our pool cover collection.