Replacement Pergola Cover Guide: How to Measure, Pick a Size and Install

|ShadeMart Team
Replacement shade cover on a backyard pergola

Quick answer: To replace a pergola cover, measure the outside length and width of the top frame, choose breathable fabric for airflow or waterproof fabric to keep rain off, and pick a cover with weighted rods and grommets so it hangs straight. Stock replacement covers fit most 8x12 to 12x20 ft pergolas; anything else can be made to size.

Step 1: Measure your pergola

  1. Width: measure across the top frame from the outside of one beam to the outside of the other, in the direction the cover will hang across.
  2. Length: measure along the frame in the direction the cover will run, end beam to end beam.
  3. Style: note whether the old cover sat flat on top, slid along cross rails in waves, or hung below the rafters. Most replacement covers slide along the rafters and drape in soft waves.
  4. Write it down in feet and inches and keep a photo of the frame – it helps if you need a custom size.

Compare your measurements with the sizes on the product page. If your frame does not match a stock size, order a custom pergola shade cover or a custom waterproof pergola cover made to your numbers.

Step 2: Breathable or waterproof?

Breathable cover Waterproof cover
Fabric 260 GSM HDPE knit 260 GSM waterproof fabric
Sun Blocks 95% of UV Blocks up to 95% of UV
Rain Passes through, never pools Sheds rain; needs a slight slope or drape
Air Cooler, airy feel Traps more warm air
Best for Hot, dry or windy areas Outdoor dining and furniture you want dry

We compare them in more detail in breathable vs waterproof pergola covers.

Step 3: Pick a stock size

Both use weighted stainless steel rods at each end so the cover stays straight, and rust-resistant grommets every 2 ft. See all options in pergola covers.

Step 4: Install the new cover

  1. Take the old cover down and check the rafters for loose screws or rot.
  2. Lay the new cover out and find the rod pockets at each end.
  3. Feed the cover over or along the rafters, starting at one end, and let it fall in even waves.
  4. Tie the grommets to the frame with the included zip ties every 2 ft so wind cannot lift it.
  5. Let the weighted rods hang at each end to keep the fabric straight.

Two people make this a 20–30 minute job on a typical 10x12 ft pergola.

No pergola? Other ways to get the same shade

If you are starting from scratch, a shade sail is usually cheaper than building a pergola. Compare the options in our patio shade canopy guide, or go straight to a rectangle sun shade sail.

FAQ

Will a replacement pergola cover fit my pergola brand?

Most replacement covers are universal: they fit wood and metal pergolas of the same frame size, whatever the brand. Measure the frame rather than relying on the model name.

How long does a pergola cover last?

Our 260 GSM covers are built for at least three full seasons and carry a 3-year warranty. Taking the cover down in winter or heavy snow helps it last longer.

Can I leave a pergola cover up in winter?

A breathable cover sheds snow better than a waterproof one, but heavy snow can still load the frame. In snowy areas, take the cover down and store it dry.

What if my pergola is an odd size?

Order a custom cover. You enter your width and length, and the price updates for that exact size.