No wall, beam or tree where your shade sail needs to go? That is what shade sail poles are for. We now sell our stainless steel poles in two ready-made kits, priced about 5% lower than buying the same poles one at a time. This guide explains which kit to pick.
Quick answer
- Two 12 ft poles – $715.99. Best when both free corners should be high, or when you want to set each corner height later with the sliding clamp.
- One 12 ft + one 8 ft pole – $617.49. Best when you want a built-in slope: one high corner and one low corner so rain runs off.
What is in each pole
Both kits use the same poles we sell individually (12 ft and 8 ft):
- Premium 304 stainless steel that resists bending, rust and corrosion.
- A base plate with 4 drilling bolts and 4 securing nuts.
- Pole sections that join together (4 ft sections; the 12 ft pole has three, the 8 ft pole has two).
- A sliding D-ring clamp, so you can fix the sail corner at any height up to the top of the pole.
- Lifetime warranty on each pole.
The sail and the sail hardware are sold separately.
Why buy a kit?
| Option | Bought separately | Kit price |
|---|---|---|
| 2 × 12 ft poles | $754.00 | $715.99 |
| 12 ft + 8 ft poles | $650.00 | $617.49 |
Same poles, one order, one delivery, and about 5% off.
Which kit fits your layout?
Two corners on the house, two on poles
This is the most common setup for a square or rectangle sail over a patio. The house corners are usually around 8–9 ft high. If you want the sail to slope toward the house, use the 12 ft + 8 ft kit and turn the sail so the low pole and the high house corner sit opposite each other, creating a twist. If you want both outer corners high for a view and headroom, use two 12 ft poles.
A sail over a pool or lawn, away from the house
For a free-standing triangle you need three poles; for a square, four. Combine kits, for example two sloped kits for a four-corner sail with two high and two low corners.
Waterproof sails
A waterproof sail needs a steeper slope so rain runs off instead of pooling. The 12 ft + 8 ft kit gives you a 4 ft height difference to start with, and the sliding clamps let you fine-tune it. See how to angle a shade sail.
Installing the poles
- Plan every corner and measure between them before you buy the sail.
- In the US, call 811 before digging so buried utility lines are marked.
- Bolt the base plate to a solid concrete footing or an existing concrete slab. The poles can also be installed in grass, soil or clay; for large sails or windy sites, a concrete footing gives the strongest anchor.
- Assemble the pole sections, set the D-ring clamp at the height you want, then attach the sail with stainless steel hardware and turnbuckles.
Full footing and installation tips are in our shade sail poles guide. For the corners, use a stainless steel 6" hardware kit or the heavy-duty 10" kit for large sails.
FAQ
Can I mount the poles on a wood deck?
The base plate is made to bolt onto solid concrete. A wood deck may not take the pull of a tensioned sail, so ask a contractor about the framing, or set the pole in the ground next to the deck.
Do the kits include a sail?
No. Pick your sail from our shade sails and your hardware separately.
Ordering poles for a bigger project?
Restaurants, schools, HOAs and contractors can get a single quote through our trade program. See our commercial shade sail buyer's guide.